Question 6028 of 223 · California Water Treatment Operator Exam
A basin has a total weir length of 150 ft and a flow of 1.2 MGD. What is the weir overflow rate?
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 6028
- D: 8,000 gpd/ft
Explanation
Weir overflow rate = flow / weir length = 1,200,000 / 150 = 8,000 gpd/ft.
More questions: Treatment Exam Math
- 6029A required CT is 36 mg/L-min and the chlorine residual at the end of the clearwell is 1.5 mg/L. What minimum contact time is needed?
- 6030A pump moves 1,000 gpm against a total head of 99 ft. What is the water horsepower?
- 6031The water horsepower of a pump is 25 hp and the pump efficiency is 80 percent. What is the brake horsepower?
- 6032A pump requires 31.25 brake horsepower and the motor is 90 percent efficient. What motor horsepower is required?
- 6033A 40 hp motor runs 24 hours at an electricity cost of $0.12 per kWh. What is the approximate daily cost? (1 hp = 0.746 kW)
- 6034Water flows at 3 ft/sec through an 8-inch pipe. What is the flow in cubic feet per second?